Live Edge 18" DIY River Kits for Charcuterie Board and Small Projects

Size: 3"-7" wide x 3/4"- 1" Thick 
- Sold in Pairs

These live edge slabs have been kiln dried, flattened, debarked, cut square on one edge and sanded to 80 grit. These slabs are very DIY friendly and can be used as a set to create a river art piece, charcuterie boards or used individually. These DIY Kits may require some cutting depending on intended use and on the size of form they are being put into. Some boards may feature voids, knots, or splits requiring extra attention.

Forms shot in the photos are NOT sold with these wood river sets. We highly recommend using one of our Reusable Forms for these river sets. Check them out here.

When our charcuterie river sets are paired together, you should be able to make a river piece approximately 6"-16" wide depending on how much epoxy you use.

The pictures are not the exact slabs that you will receive but they do represent an example of what you can expect to receive. 

We've personally gone through all the slabs to ensure that everything being shipped is up to our standards.

FAQ's

What Oil should I finish my River project with?
We recommend Walrus Oil- Cutting Board Oil or Rubio Monocoat Pure 2C Oil for to finish charcuterie boards.

How much Epoxy will you need for a Charcuterie (3/4"-1" thick) River?
2" river @ 24" long needs .786 L of Ecopoxy FlowCast.
3" river @ 24" long needs 1.18 L of Ecopoxy FlowCast.
4" river @ 24" long needs 1.57 L of Ecopoxy FlowCast.
5" river @ 24" long needs 2 L of Ecopoxy FlowCast.

2" river @ 36" long needs 1.18 L of Ecopoxy FlowCast.
3" river @ 36" long needs 1.77 L of Ecopoxy FlowCast.
4" river @ 36" long needs 2.36 L of Ecopoxy FlowCast.
5" river @ 36" long needs 2.95 L of Ecopoxy FlowCast.

Learn

Potential Uses

River Art Piece

River Charcuterie Boards

River Serving Boards

River Coasters

River Cribbage Board

DIY Projects